Cost

Video-based vehicle detection technology installed at 17 intersections was estimated to cost $350,910.

City of Scottsdale Certification Request for Video Camera Firmware and Hardware.


03/21/2016
Scottsdale; Arizona; United States


Summary Information

The City of Scottsdale implemented a project to upgrade its aging loop detection infrastructure with video-based vehicle detection technology. As part of a Bicycle Signal Detection program, the City replaced loops at 17 intersections with 62 video-detection cameras and the associated hardware and software.

Product Cost:

Description
Quantity
Unit Price
Total
NEXT-CCU-PAK VantageNext CCU (Cabinet Control Unit)
17
$4,200
$71,400
NEXT-VP-PAK VantageNext VP (Video Processor)
62
$2,700
$167,400
NEXT-CAM-PAK VantageNext WDR (Wide Dynamic Range) Camera
62
$1,650
$102,300
EMCABLE-PAK Cable to connect VPs to CCU (4)
17
$15
$255
RJ45CABLE-PAK RJ45 Ethernet Patch Cable 5ft (4)
17
$15
$255
AS-0175-5-62 Pelco Camera Bracket
62
$150
$9,300
Total Estimate
$350,910

The City of Scottsdale required specific physical, functional, and performance characteristics for its video-based vehicle detection system. The system selected included software that discriminately detects the presence of individual vehicles and bicycles in single or multiple lanes using only the video image.

Detection zones used only an embedded software application. A monitor, keyboard and pointing device were used to place the zones on a video image. A minimum of 32 detection zones per camera view were available.

The CCU was a standard 19-inch rack format that was designed to fit into Traffic Signal 330 style cabinets. The CCU incorporated video surge suppression for each video input and was appropriately grounded to the cabinet ground rod using 14 AWG minimum. The CCU provided a Wi-Fi connection over a standard 2.4GHz connection. The Wi-Fi connection was enabled and disabled by a switch on the CCU. The CCU provided an indicator when the Wi-Fi connection was active.

The camera imager employed a WDR technology to compensate for wide dynamic outdoor lighting conditions. The dynamic range is greater than 100 dB.

The video detection system software also supported bicycle type zones where the zone could differentiate between motorized vehicles and bicycles, producing a call for one but not the other.


System Cost Comments

No comments posted to date

Comment on this System Cost

To comment on this summary, fill in the information below and click on submit. An asterisk (*) indicates a required field. Your name and email address, if provided, will not be posted, but are to contact you, if needed to clarify your comments.



Source

City of Scottsdale Video Camera Firmware and Hardware

Author: Prosnier, Eric (ADOT Project Manager)

Published By: City of Scottsdale

Source Date: 03/21/2016

Other Reference Number: Project Number SCT-0(228)D

URL: http://apel.transportation.org/Common/DownloadFile/?Type=1&id=693

System Cost

Video detection system at 17 intersections: $350,910.

Rating

Average User Rating

0 ( ratings)

Rate this System Cost

(click stars to rate)


Keywords

CCTV, closed circuit television cameras, road monitoring, sensors, vehicle detector, traffic detection, traffic monitoring, congestion monitoring

Cost ID: 2017-00387